Milling höfuð og Milling Head Viðhengi

Milling Heads
milling head

SPECIFICATION

5 HP MILLING HEAD

10 HP MILLING HEAD

MHE-5

MHR-5

MHCL-5

MHR-10

MHCL-10
SPINDLE TAPER

ISO-40

ISO-40

ISO-40

ISO-50

ISO-50

SPINDLE SPEED

3 (205,360 & 630 RPM)

6 (90,150,195,260,335 & 500)

 4 (100,180, 250 & 480) 6 (80,122, 158, 260, 335 & 500) 4 (80,160, 200 & 360)
MANUAL QUILL

Not Available

75 mm

75 mm

100 mm

100 mm
MAX CUTTER RECOMMENDED

Ø125 mm

Ø160 mm

Ø160 mm

Ø300 mm

Ø300 mm
MILLING HEADS are offered with the following optional features: a) MANUAL BACK PLATE for 5 HP milling heads for (a) taper machining by manually setting the spindle axis ±45?, (B) optimizing the available quill movement & (c) quick & easy alignment of the spindle with respect to the table ORB) MECHANICAL TILTING BACK PLATE through bearing supported worm shaft & integral sector gear for fatigue free manual tilting of the back plate for both 5 HP & 10 HP milling heads ORc) PLAIN BACK PLATES only for (a) optimizing the available quill movement & (c) quick & easy alignment of the spindle with respect to the table, but with no facilities for tilting the head.d) Right angle attachments are suitable for using max. Ø125 mm cutter. With 5 HP milling höfuð, the right angle attachment is provided with ISO-40 input drive arbor; with 10 HP milling höfuð, the right angle attachment is provided with ISO-50 input drive arbor. But the output spindle taper in either case is ISO-40.(Different spindle speeds in MHR series heads are through change gear pairs provided. Different spindle speeds in MHCL series heads are through lever operated system) FEATURES OF MILLING HEAD:

  • Close grained, high grade, stress-relieved castings
  • Taper roller bearings provide rigid support to the spindle
  • Drive though ground splines in the spindle
  • Gears, spindle, quill etc made of case hardening steel, case hardened & ground
  • Bull gear and mating gears, helical for high torque transmission
  • Gear teeth are ground for noise free rotation
  • Spindle bearings are SKF/FAG make; Motors: NGEF/ABBK/KEC/SIEMENS
  • Spindle bearings lubricated for life with molybdenum sulfide grease
  • Self contained, cam operated automatic lubrication system for gear box
  • Spindle run-out on face, ID & OD: within 10 microns

SCOPE OF SUPPLY: IF MILLING HEADS ARE ORDERED WITHOUT FEED SYSTEM, PROVIDING CONTROLS FOR THE MILLING HEAD MOTOR IS NOT IN OUR SCOPE. TOOLS, CUTTERS, JOB CLAMPING ELEMENTS ARE NOT IN OUR SCOPE.

  • AVAILABLE RAM TYPE MILLING HEAD, SPECIAL PURPOSE MILLING HEAD, HIGHER CAPACITY MILLING HEAD UPTO 50 HP
  • OVER 3000 PLANERS CONVERTED INTO PLANO MILLS, ALL OVER INDIA & ABROAD IN THE PAST 25 YEARS.
  • MULTIPLE REPEAT ORDERS FROM PRESTIGEOUS CLIENTELE LIKE TEXMACO, BHEL, SAIL, HMT, L&T ETC.
  • READY-MADE, CONVERTED PLANO MILLS FOR SALE.
  • LINEAR PLANO MILLS, ROTARY PLANO MILLS, TRAVELLING COLUMN PLANO MILLS, RAM TYPE PLANO MILLS, SPECIAL PURPOSE PLANO MILLS, CNC PLANO MILLS

FOR MORE INFORMATION ON PLANO MILLING CONVERSION AND AXES FEED SYSTEM PACKAGE PLASE SMELLTU HÉR

FOR PRINTABLE E-CATALOG OF PLANO MILLING CONVERSION PLEASE SMELLTU HÉR

 

PLANO MILLING HEADS

MHCL CHANGE LEVER TYPE PLANO MILLING HEAD

MHCL CHANGE LEVER TYPE PLANO MILLING HEAD

MHR MANUAL GEAR CHANGE TYPE PLANO MILLING HEAD

MHR MANUAL GEAR CHANGE TYPE PLANO MILLING HEAD

 

RAM TYPE MILLING HEAD

Ram type head A ram type milling head in a converted Plano miller virtually throws innumerable possibilities like boring, grooving, facing etc, apart from all other normal milling operations. The sleek ram facilitates access to the cutter through narrow, deep passages and perform almost all kinds of machining operations.

FOR MORE INFORMATION RAM TYPE MILLING HEAD KINDLY SMELLTU HÉR.

RIGHT ANGLE MILLING HEAD

Right Angle Attachment with intermediary gear box for elevated center distance

Right angle milling head (7)

With a Right Angle Milling Head you can machine at right angles to the spindle axis.

EXTENDED REACH RIGHT ANGLE MILLING HEAD

Long Reach Right Angle Attachment with ISO 40 spindle taper & 1.2 m extended reach

Long Reach Right Angle Attachment with ISO 40 spindle taper & 1.2 m extended reach

FOR MORE INFORMATION ON RIGHT ANGLE MILLING HEADS SMELLTU HÉR

UNIVERSAL MILLING HEAD

Universal Milling Head

Universal milling viðhengi er innflutningur staðinn, multi-gagnsemi viðhengi með kúlulaga Contouring og óendanlega breytilegum stefnumörkun getu á þeirri flugvél.

FOR MORE INFORMATION ON UNIVERSAL MILLING HEAD SMELLTU HÉR