8 Station Rotary table based Drilling and Chamfering SPM
Gnéithe & Specs:
- Rigid, heavily ribbed, fabricated and stress relieved structural.
- Atop the base, a servo driven rotary table is mounted which is dived into 8 stations.
- The fixture, will be designed to rest, locate on the ID. The clamping will be through pneumatic swing clamp cylinders.
- Station 1 will be loading station. This station will have a pneumatic pick and place arm in combination with pneumatic cylinders to load the component.
- Station 2 will be clamping station, where the component is clamped.
- Station 3 will be top chamfering station. This station will have a chamfering head with a counter sink drill mounted on it. The drilling head will have a vertical servo stroke for drilling feed.
- Station 4 will be drilling station. This station will have a unit head with Ø1.8mm drill mounted on it. The unit head will have a vertical pneumatic stroke for feed.
- Station 5 will be back counter sink station. This station will have a unit head with counter sink drill mounted on it. The unit head will have a vertical servo stroke for feed.
- All unit heads of Suhner make.
- Station 6 will be inspection station. This station will have a pneumatic cylinder which will plunge into the drilled hole to check for hole.
- Station 7 will be job declamp station, where the job is declamped.
- Station 8 will be job unloading station. This station will be similar to loading station, but will unload the component into a bin.
- The Servo, drive, HMI, PLC will be of Siemens make.
- Each unit head will have a tool sensor to sense the breakage of the tool.
- Centralized lubrication system will be provided.
- The machine will have a recirculating coolant system to flush out the chips.
- The machine will be provided with splash guard.
Seicheamh Oibríocht:
- Load the components into the job feeding bin and press auto-cycle.
- The pneumatic cylinder moves the arm over the job, picks the job and places it over the fixture.
- Rotary table indexed, job gets clamped.
- The job gets indexed to station 3 and top chamfering takes place,
- The job gets indexed to station 4 and the Ø1.8mm drill, drills the component.
- The job gets indexed to station 5 and the bottom chamfering takes place.
- The job gets indexed to station 6, where the inspection will happen.
- The job gets indexed to station 7, where the job gets declamped.
- The job gets indexed to station 8, where the job is picked from the fixture and dropped into the chute leading to the bin.
- This process is continuous and when machining operation is going on at other stations, the job loading and unloading will be going on at other stations.
Cycle Time: An output of approximately 1 components every 3 seconds.
Video:
Déan teagmháil linn le haghaidh tuilleadh eolais a táirge
Sonraí Teagmhála
- +91-80-28361767
- info@shenoyengineering.com
- +91-80-28361725
Táirge
- Uirlisí & Gearrthóirí
- Speisialtóireacht Milling
- Milling Imeall Pláta, Pláta Bevelling Meaisín
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- Plano Miller, Déphléacsach, Cineál Urlár
- Milling Head with Facing attachment
- Il Uillinn Uilíoch Milling Iatán
- Ceart Ceangaltáin Uillinn Milling
- Thiontú Millers Plano
- Planomilling Tiontú Kit
- Cuspóir Speisialta Plano Miller
- Ram Cineál Milling & Ceann Leadránach
- Retrofits Milling
- 3 Aiseanna Cuspóir Speisialta Meaisín Milling
- Mutli Ceann Milling SPM
- Cinn Milling agus Ceangaltáin Ceann Milling
- Meaisín Cuspóir Speisialta
- SPM Miotal Gearradh
- Meaisín Cuspóir Speisialta
- 8 Station Rotary table based Drilling and Chamfering SPM
- Quadruple Head Milling SPM
- Two Station Four Spindle Turning SPM
- CNC 3 axes four spindle Profile Milling SPM
- Taper Milling SPM
- Triple Spindle Tapping SPM
- U Drilling and Boring SPM
- Drilling, Chamfering and Deburring SPM
- Con Rod Taper Milling SPM
- Con Rod Small End Bore Chamfering SPM
- Rotary In-Gate Milling SPM
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- Table Top Drilling Machine with Servo Positioning
- Double Head Slot Milling & Notch Milling SPM
- Double Head Slot Milling & Drilling SPM
- Duplex Milling Machine – Economy Version
- 2 aiseanna CNC Mutli taper SPM casadh
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- Quadruple Head Slot Milling & Slitting SPM
- Duplex Plunge Facing SPM
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- Rotary Coordinate Drilling SPM
- Gunna Druileála Meaisín
- CNC BORING MILL- VMC, HMC agus VTL rollta i amháin
- Super Críochnú Machine Cuspóir Speisialta
- Buffing Meaisín Cuspóir Speisialta
- SPM Déantúsaíocht
- SPM Miotal Gearradh
- Insitu speisialtóireachta
- Portable CNC Mill
- I-Situ flange facer, Inaistrithe gathacha Planer & Leath Réiteach Insitu
- 3 AXES, CNC PORTABLE MILLING & THREADING MACHINE
- Portable 2 axes CNC wheel turning lathe
- ASTHRA – Hand driven flange facer
- Semi Solutions Insitu
- Cearnóg flange I-Situ Miller
- Flange Miller
- Líne Leadránach Meaisín Cuspóir Speisialta
- Meaisíní CNC
- Budget Vertical Machining Center
- 3 Axes CNC Milling Machine
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- CNC Double Column Milling Machine
- CNC 3 axes four spindle Profile Milling SPM
- Portable 2 axes CNC wheel turning lathe
- 3 Axes Horizontal CNC machine
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- 2 aiseanna CNC Mutli taper SPM casadh
- CNC Plano Mhuilleora
- CNC Cuspóir Speisialta Machine Táthú
- Fixtures for VMC and HMC
- Ceangaltáin
- Services
Aistrigh Isteach :-
Edit Translation