ASTHRA
IN-SITU HAND DRIVEN ID CLAMPING FLANGE FACER
We, at Shenoy Engg. پرائیویٹ. لمیٹڈ. manufacture In-situ, portable Electro-Mechanical Flange facers. These flange facers are mainly used in for generating smooth or serrated finish on the flange butting surface. We have supplied these flange facers to various companies and they are performing to the customer’s satisfaction.
Based on the feed back from the users of our electro-mechanical flange facers, there is a need for a flange facer which should be compact and light weight. It should be easily to carry and power source required for operation should be easily available.
We took all these factors into consideration and developed a Hand Driven Flange Facer. 70% of the flange facer is made of aluminum which make it light and is hand driven which eliminates the need for any power source, be it electricity, hydraulics or pneumatic. Since this does not involve any powered source except for human power, this product is fire hazard free and most ideally suited for petroleum, chemical refineries.
This flange facer has a facing range from 25 mm to 310mm i.e. 1” to 12” and has a clamping range of 1” to 6”. The main components of this facer like arm, housing, is cast from Aluminum to make it light. This whole unit weighs under 8 Kgs. Sliding surface is made of LM guides and blocks to provide utmost frictionless smooth movement, keeping in mind the operator’s fatigue. The tool is moved over the LM guides through a leadscrew-box nut arrangement coupled through a worm reduction gear box. The input of the worm reduction gear box has a knob which can be rotated. The box nut is made of phosphorus bronze which creates less friction against the lead screw while rotating. The tool is provided with a single point cutting tool of cross section 10×10 ملی میٹر. The flange facer will be provided with tool holder have standard ISO carbide inserts, which are easily available in the market. The arm on which the slide unit is mounted is connected to rotatable housing. A case hardened hollow spindle is supported by two deep groove ball bearings inside the housing to provide sufficient stiffness against the radial cutting loads while facing. Inside the hollow spindle, a threaded clamp shaft is provided. The spindle also has 3 slots, where 3 jibs can be mounted. When the clamp shaft is rotated, a taper provided on the shaft pushes the jibs out of the slot equally thereby clamping the facer inside the bore and self-centers the Flange Facers.
Specification: | Inches | Millimeter |
Facing Range | 1” to 12” | 25.4 mm – 304.8 ملی میٹر |
Clamping Range | 1” to 6” | 25.4 mm – 152.4mm |
Tool Vertical Traverse | 1” Manual through fine pitch bolt | 25.4 mm Manual through fine pitch bolt |
Tool Post Swivel | ±45° | |
Tool | Single point cutting tool with indeaxble Standard Carbide inserts | |
Maximum Depth of cut | 0.2 mm or 0.007” | |
Finish Obtainable | Serrated Finish and smooth finish by changing of gear box. | |
Slides ways | LM Guides of HIWIN make | |
Gearings | 2 No.s of SKF make deep groove ball bearings. | |
ڈرائیو | Hand Driven through worm reduction gear box coupled to lead screw and phosphorus bronze box nut | |
Clamping | By self-centering jibs – Through tightening of threaded clamp shaft | |
Jibs | Detachable jibs given in incremental sizes. Held to each other through screw | |
Jib locking in Spindle | Through O-rings | |
Targeted Market | Piping, refinery, ship building, maintenance work |
Video:
IN-SITU HAND DRIVEN OD CLAMPING FLANGE FACER
Specification:Inches | Millimeter | |
Facing Range | 0 to 12” | 0 mm – 304.8 ملی میٹر |
Clamping Range | 3” to 12” | 76.2 mm – 304.8 ملی میٹر |
Tool Vertical Traverse | 1” manual through fine pitch bolt | 25.4 mm manual through fine pitch bolt |
Tool Post Swivel | ±45° | |
Tool | Single point cutting tool with indeaxble Standard Carbide inserts | |
Maximum Depth of cut | 0.2 mm or 0.007” | |
Finish Obtainable | Serrated finish and smooth finish by changing of worm reduction gear box. | |
Slides ways | LM Guides of HIWIN make | |
Bearings | 4 No.s of FAG make deep groove ball bearings. | |
ڈرائیو | Hand Driven through spur gear combination with worm reduction gear box coupled to lead screw and phosphorus bronze box nut | |
Clamping | Through tightening of threaded studs | |
Leveling | Manually through M16 threaded bolts provided on the legs of the facer | |
Weight | Approximately 35 kg |
If you are interested, please feel to contact us.
Contact:
Shenoy انجینیری. پرائیویٹ. لمیٹڈ.
#7, 16th Cross, Doddanna انڈسٹریل اسٹیٹ
Near Peenya 2nd Stage, بنگلور – 560 091
بھارت
Ph: +91-80-2836 1767; +91-80-2836 1725
Website: www.shenoyengineering.com
ای میل: info@shenoyengineering.com
مصنوعات کی معلومات کے لئے ہم سے رابطہ کریں
رابطے کی تفصیلات
- +91-80-28361767
- info@shenoyengineering.com
- +91-80-28361725
مصنوعات
- فورم کے اوزار & کٹر
- گھسائی کرنے والی تخصص
- پلیٹ ایج کی گھسائی کرنے والی, اریب جنس مشین پلیٹ
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- ہوائی جہاز ملر, ڈوپلیکس, فلور قسم
- Milling Head with Facing attachment
- ملٹی زاویہ یونیورسل کی گھسائی کرنے والی منسلکہ
- صحیح زاویہ کی گھسائی کرنے والی کے ساتھ منسلک
- تبدیل ہوائی جہاز پیسنے والے کارخانے
- تبادلوں کٹ Planomilling
- سپیشل مقصد کی ہوائی جہاز ملر
- رام کی قسم کی گھسائی کرنے والی & بورنگ ہیڈ
- گھسائی کرنے والی Retrofits
- 3 سپیشل مقصد کی گھسائی کرنے والی مشین محور
- Mutli ہیڈ کی گھسائی کرنے والی SPM
- گھسائی کرنے والی سربراہان اور ملنگ ہیڈ ملحقات
- سپیشل مقصد کی مشین
- دھات کاٹنے SPM
- سپیشل مقصد کی مشین
- 8 Station Rotary table based Drilling and Chamfering SPM
- Quadruple Head Milling SPM
- Two Station Four Spindle Turning SPM
- CNC 3 چار تکلا پروفائل گھسائی کرنے SPM محور
- Taper Milling SPM
- Triple Spindle Tapping SPM
- یو ڈرلنگ اور بورنگ SPM
- Drilling, Chamfering and Deburring SPM
- Con Rod Taper Milling SPM
- Con Rod Small End Bore Chamfering SPM
- Rotary In-Gate Milling SPM
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- Table Top Drilling Machine with Servo Positioning
- Double Head Slot Milling & Notch Milling SPM
- Double Head Slot Milling & Drilling SPM
- ڈپلیکس گھسائی کرنے والی مشین - معیشت ورژن,,en,روٹری ان گیٹ کی گھسائی کرنے والی SPM,,en,AXES,,en,CNC پورٹیبل ملنگ,,en,شیڈنگ مشین,,en,ڈپلیکس کی گھسائی کرنے والی اور سپلائی SPM,,en,اوپر مشین کے کام کی ویڈیو,,en
- 2 محور CNC Mutli اثر Taper ٹرننگ SPM
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- Quadruple Head Slot Milling & Slitting SPM
- ڈوپلیکس چھلانگ لگانے SPM سامنا
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- Rotary Coordinate Drilling SPM
- گن سوراخ کرنے والی مشین
- CNC BORING MILL- VMC, HMC and VTL rolled into one
- سپر تکمیل خصوصی مقاصد کے لئے مشین
- سپیشل مقصد کی مشین Buffing
- تعمیر SPM
- دھات کاٹنے SPM
- Insitu تخصص
- پورٹ ایبل CNC مل
- میں سوستانی flange کے Facer, پورٹ ایبل ریڈیل Planer کی & نیم Insitu حل
- 3 AXES, CNC PORTABLE MILLING & THREADING MACHINE
- پورٹ ایبل 2 محور CNC پہیا تبدیل خراد
- ASTHRA – Hand driven flange facer
- نیم Insitu کے مسائل کے حل
- چوک flange کے میں سوستانی ملر
- flange کے ملر
- لائن بورنگ خصوصی مقاصد کے لئے مشین
- CNC کی مشینیں
- Budget Vertical Machining Center
- 3 محور CNC کی گھسائی کرنے والی مشین
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- CNC Double Column Milling Machine
- CNC 3 چار تکلا پروفائل گھسائی کرنے SPM محور
- پورٹ ایبل 2 محور CNC پہیا تبدیل خراد
- 3 Axes Horizontal CNC machine
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- 2 محور CNC Mutli اثر Taper ٹرننگ SPM
- CNC کی ہوائی جہاز پیسنے والے کارخانے
- CNC کی سپیشل مقصد کی ویلڈنگ مشین
- Fixtures for VMC and HMC
- آئٹم کے ساتھ منسلک
- Services
میں ترجمہ :-
ترجمہ میں ترمیم کریں